At Autotrad we take our business seriously. That business is supplying the best product we can. Only by testimony from our customers can we know if we are successful or not.
At Autotrad we take our business seriously. That business is supplying the best product we can. Only by testimony from our customers can we know if we are successful or not.
Hi Gabriele.
Unfortunately no one can reply on this page, however we are happy to address your problem:
The only way to really test your coils is with the appropriate equipment. You can however check the resistance across the secondary and primary coils with a Multi Meter. If your readings are consitant across all the coils and the coils fire ok in your engine then you probably don’t have a coil issue.
Your Drifter coils would not be affected with a consistance 13+ volts in fact should perform better and what you have now is in the top order in power delivery.
You would be more likely to get problems with spark plugs set too close.
We recommend you start with your plugs set at the recommended factory settings and then move out in .02 steps until you are satisfied with how your car is performing.
Plugs are always an important issue when seeking performance. We recommend good quality plugs at all times
and Drifter coils can handle a wider setting than conventional OEM coils.
Hope this helps
Keep it straight (or not)
Milton
Hello all
I gota set of autotrad coil packs from autotrad been working great for the past year great improvement from the factory coil packs
My question in the last year I replaced alternator because of low charge rates and replaced my battery for a optima red top to give stable voltage at 13.95 atm
So how can I test my coil packs ? As coil packs need voltage a good level otherwise if it goes below 12 volts
They be fried
Thanks heaps any help
Hi Leslie
Mate so sorry I didn’t get to reply sooner. The system failed and I didn’t get the notice for your comment
Glad we could help. That load you used is sufficient.
Now you can enjoy your car the way it was meant to be, but no
one will tell you about it except us.
Regards
Milton
I did this on my fg after fkn aroumd with my throttle body and its fixed! Youre a lifesaver.
What are all the electrical loads i should put on when in neutral idle?
I’m not sure i did step one for 2 minutes either but i did all the others with a stopwatch. Might need to try again. Electrical loads i had on were headlights, and air conditioner. Are there any more i should do? Cheers so much
Hi Deano.
Sorry I didn’t reply earlier.
It’s always a problem to diagnose from a distance if you
would like to email me or phone me I am happy to give you my
20c worth.
Regards
Milton
Hello All , I have recently had issues with my BF falcon dedicated gas ute miss firing. I have changed plugs made bout 60% difference. I then changed all coils. Its now 85% better overall. Any suggestions on what i could do further if possible please to get it running better than it is… Cheers..
Deano
Hi Shaun,
Sorry but we are out of that coil and will not have stock until after Christmas.
Thanks for your interest
Milton
Hi just read about ba- bf ignition coils want to buy them but searching your sight said no such product available. I think the stock number is #201056861976 taken off one of the emails you had from a customer can you help with my inquiry.
Thanks
Thank you so much for giving everyone such a spectacular possiblity to discover important secrets from here. It is usually so pleasant and as well , jam-packed with a lot of fun for me personally and my office mates to search the blog a minimum of three times per week to learn the fresh items you have got. Not to mention, we’re usually pleased with all the staggering information served by you. Some 1 points in this posting are in fact the simplest I have ever had.